認(rèn) 證：工商信息已核實(shí)
訪問量：724452
桂林礦山設(shè)備有限公司 2025-03-31 點(diǎn)擊101次
If we buy a new Raymond machine, we can assemble it in our own factory, then for the newly assembled Raymond machine, they can not be immediately used in production, because the Raymond machine needs to be debutted at this time, and only the debutted Raymond machine can be put into production. Otherwise it will be a very dangerous thing for Raymond machine, why would it be a very dangerous thing? Because the object of our Raymond machine is stone, it is different from other equipment, so the work of the Raymond machine itself is a very dangerous thing, so how can you debug the Raymond machine?
For Raymond machine commissioning work should first start from the test, when we put Raymond machine grinding installation, we can use manual way to turn the disk, in the process of rotation, we are mainly to observe, see if there is some chuck phenomenon, if there is no chuck phenomenon, we can carry out the test work, There are two ways for the test, one is the no-load test way, the other is the load test way, we can choose a test way according to their actual situation, we can also carry out two test ways, which is more conducive to our safety test.
For the no-load test, that is, we test the Raymond machine without feeding, for the no-load test we must meet the following conditions, the first is the electrical interlock system test, then we can press the start procedure, so that our starting procedure and closing procedure are in line with the design needs, in addition, we must ensure that all parts are tightened and firm. In addition, each of them has a loosening phenomenon, and third, all the flywheels are able to rotate smoothly. In addition, in the process of operation, we should always pay attention to the temperature rise of the bearing, and the temperature rise of the bearing is best not to exceed 30 degrees. In addition, during the operation process, we must ensure that the bearing lubrication is normal and there is no oil leakage.
If you have any interest or other inquiries, please contact me on WhatsApp: 13677868426